APC Smart-UPS VT 30000VA uninterruptible power supply (UPS)


APC Smart-UPS VT 30KVA 400V w/3 Batt Mod Exp to 4 Int Maint Bypass Parallel Capable

Smart-UPS VT, 24 kW/30 kVA, 304 - 477V, DB-9, RS-232, Smart-Slot, 5h

APC Smart-UPS VT, 30000 VA, 24000 W, 41 A, VRLA, 5 h, 18.3 min

APC Smart-UPS VT. Output power capacity: 30000 VA, Output power: 24000 W, Maximum current: 41 A. Battery type: VRLA, Battery recharge time: 5 h, Typical backup time at half load: 18.3 min. Colour of product: Black. Noise level: 55 dB. Weight: 536.8 kg

Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.

Scalable runtime
Allows additional run time to be quickly added as needed.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.

Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS overload condition or fault.

Battery modules connected in parallel
Delivers higher availability through redundant batteries.

User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Battery replacement without tools
Allows quick, easy battery replacement.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Shippable with modules installed
Enables pre-installation UPS staging and testing and faster installation.

Modular design
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.

Network manageable
Provides remote management of the UPS over the network.

InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure® Manager.

LCD display
Alpha-Numeric Display which displays system parameters and alarms.

Audible alarms
Provides notification of changing utility power and UPS conditions.

Programmable frequency
Ensures compatibility with different input frequencies.

LED status indicators
Quickly understand unit and power status with visual indicators.

Customize UPS capabilities with management cards.

Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Manual maintenance bypass
Reduces installation costs by eliminating the need for an external mechanical bypass.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals.

Cold-start capable
Provides temporary battery power when the utility power is out.
Depth (mm)813.0
Height (mm)1499.0
Width (mm)559.0
Basic Specification
Marketing TextProvides remote management of the UPS over the network. Minimizes installation costs by enabling the use of smaller generators and cabling.
PI DateMar 2012
Brand NameAPC
Manufacturer Web Sitehttp://www.apc.com/
Product TypeUninterruptible Power Supply
Product LineSmart-UPS
Operating Temperature0 - 40
Other Features* Hot-swappable batteries
* Generator compatible
* User-replaceable batteries
* Programmable frequency
* Frequency and voltage regulation
* Cold-start capable
Control Panel* Multi-function LCD status and control console
Audible Alarm* Audible and visible alarms prioritized by severity
Input connection type3PH + N + G
Nominal output voltage400
Dimensions (WxDxH)813 x 559 x 1499 mm
Output connections- 3PH + G;
- 3PH + N + G.
InterfaceDB-9, RS-232, Smart-Slot
Output voltage note380:400/415V 3
Typical backup time at half load18.3 min
Typical backup time at full load5.5 min
Battery typeVRLA
Hot-swap batteryY
Battery recharge time5 h
Replacement battery cartridge3
Input Voltage400
Output Power24000 W
Output Voltage400
Input Frequency40 - 70
Output Frequency47 - 53
Maximum current41 A
Output power capacity30000 VA
Emergency Power Off (EPO)Y
Input Connection1 x Hard Wire 5-wire
Colour of productBlack
Noise level55 dB
LED indicatorsY
Audible alarm(s)N
Weight & dimensions
Weight536.8 kg
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 95%
Storage temperature (T-T)-50 - 40 °C
Storage relative humidity (H-H)0 - 95%
Logistics data
Quantity per pallet1 pc(s)
Product FamilyAPC - SCHNEIDER Power & Rack Equipment Po

Write a review

Please login or register to review

Stock Status

This product is currently Out of Stock and can only be pre-ordered online. Once available, ETA will be provided via email. For more information, please use our contact us page

Flat Rate Shipping - $9.90

$9.90 DELIVERY FEE applies to all orders within Australia.


Different rates may apply for items >25kg or where special delivery requirements are requested


We deliver to Melbourne, Sydney, Brisbane, Perth, Adelaide, Canberra, Hobart, Darwin, Geelong, Albury, Newcastle, Wollongong, Gold Coast, Cairns, Townsvile and other major cities and towns in Australia. We also offer fast delivery to regional areas in Victoria (VIC), New South Wales (NSW), Queensland (QLD), Western Australia (WA), Northern Territory (NT), Tasmania (TAS) and Australian Capital Territory (ACT).

  • Brand: APC
  • Product Code: SUVTP30KH3B4S
  • Availability: Out Of Stock
  • $20,184.01
  • Ex Tax: $18,349.10