APC Smart-UPS VT 15kVA 400V w/2 15000VA uninterruptible power supply (UPS)
APC SUVTP15KH2B2SAPC (SUVTP15KH2B2S) SMART-UPS VT 15KVA 400V W/2 BATT MOD., SUP 5X8, INT MAINT BPS, P-CAP
Smart-UPS VT 15kVA 400V w/2 Batt Mod., Start-Up 5X8, Int Maint Bypass, Parallel Capable
APC Smart-UPS VT 15kVA 400V w/2, 15000 VA, 12000 W, 40/70, 21 A, Sealed Lead Acid (VRLA), VRLA
APC Smart-UPS VT 15kVA 400V w/2. Output power capacity: 15000 VA, Output power: 12000 W, Power supply input frequency: 40/70. Battery technology: Sealed Lead Acid (VRLA), Battery type: VRLA, Battery recharge time: 5 h. Colour of product: Black. Noise level: 64 dB. Certification: C-tick,CE,EN 50091-2,EN/IEC 62040-3,IEC 61000-3-2, IEC 61000-3-3,ISO 14001,ISO 9001,VFI-SS-112APC Smart-UPS VT, 12 kW / 15 kVA,Input 400V 3PH / Output 230V, 400V 3PH, Interface Port DB-9 RS-232, Smart-Slot, Extended runtime model.
Includes: Battery modules ship installed, Bolt down brackets, CD with software, Installation guide, Network Management Card, Smart UPS signalling RS-232 cable, Start up included, User Manual.
- Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.
- Scalable runtime
Allows additional run time to be quickly added as needed.
- Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
- Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
- Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS overload condition or fault.
- Battery modules connected in parallel
Delivers higher availability through redundant batteries.
- User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
- Battery replacement without tools
Allows quick, easy battery replacement.
- Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Shippable with modules installed
Enables pre-installation UPS staging and testing and faster installation.
- Modular design
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
- Network manageable
Provides remote management of the UPS over the network.
- InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
- LCD display
Alpha-Numeric Display which displays system parameters and alarms.
- Audible alarms
Provides notification of changing utility power and UPS conditions.
- Programmable frequency
Ensures compatibility with different input frequencies.
- LED status indicators
Quickly understand unit and power status with visual indicators.
Customize UPS capabilities with management cards.
Total Cost of Ownership
- Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
- Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
- Manual maintenance bypass
Reduces installation costs by eliminating the need for an external mechanical bypass.
- Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
- Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
- Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals.
- Cold-start capable
Provides temporary battery power when the utility power is out.
|Input connection type||Hard Wire 5-wire (3PH + N + G)|
|Dimensions (WxDxH)||356 x 812 x 1499 mm|
|Output connections||(1) Hard Wire 4-wire (3PH + G) |
(1) Hard Wire 5-wire (3PH + N + G)
(1) Screw Terminals
|Nominal input voltage||400|
|Interface||DB-9 RS-232, Smart-Slot|
|Package dimensions (WxDxH)||650 x 1062 x 1643 mm|
|Battery technology||Sealed Lead Acid (VRLA)|
|Battery recharge time||5 h|
|Replacement battery cartridge||2|
|Output Power||12000 W|
|Maximum current||21 A|
|Output power capacity||15000 VA|
|Power supply input frequency||40/70|
|Emergency Power Off (EPO)||Y|
|Colour of product||Black|
|Noise level||64 dB|
|Weight & dimensions|
|Package weight||428.2 kg|
|Certification||C-tick,CE,EN 50091-2,EN/IEC 62040-3,IEC 61000-3-2, IEC 61000-3-3,ISO 14001,ISO 9001,VFI-SS-112|
|Operating temperature (T-T)||0 - 40 °C|
|Operating relative humidity (H-H)||0 - 95%|
|Storage temperature (T-T)||-15 - 45 °C|
|Operating altitude||0 - 999.9 m|
|Storage relative humidity (H-H)||0 - 95%|
|Non-operating altitude||0 - 15000 m|